
COMPAC
Cable Fault Locating System COMPAC is prime system to provide quick, effective, accurate and safe fault location. Specifically designed for service, industrial and power utility companies. It is a multi functional system in a trolley mounting design. The HV surge tester, DC High voltage test set, Arc reflection and Burn / Proof test is given for cable fault location of short circuit, open circuit, high resistance, and intermittent and sheath faults.

Optimized surge energy
for switchable capacitors
values for each range

Pin-point location of cable faults in Low, Medium & High voltage cables by acoustic method

Perform
DC / Proof
test up to 40 kV

Burn test
up to 40 kV

High energy
upto 2000J

Fully protected operation
with three safety interlocks
Technical Specifications
Technical Specifications | ||||
COMPAC 20 | COMPAC 20D | COMPAC 40 | COMPAC 40D | |
Impulse Mode | ||||
Voltage range in kV | 0-4 /0-8 /0-16 | 0-4 /0-8 /0-16 | 0-8/0-16/0-32 | 0-8/0-16/0-32 |
Energy (at each range) in Joules | 1000 | 2000 | 1000 | 2000 |
Single Impulse | YES | YES | YES | YES |
Selectable auto frequency per minute |
40 /20 / 10 | 40 /20 / 10 | 40 /20 / 10 | 40 /20 / 10 |
ARC module | YES | YES | YES | YES |
DC Test Mode | ||||
DC Test Mode | YES | YES | YES | YES |
Voltage in kV | 0 – 20 | 0 – 20 | 0 – 40 | 0 – 40 |
Current in mA | 20 | 20 | 20 | 20 |
Burn Current in mA (Optional) | 200 @ 5kV 100 @ 10Kv 50 @ 20Kv |
200 @ 5kV 100 @ 10Kv 50 @ 20Kv |
300 @ 5Kv 150 @ 20Kv 75 @ 40Kv |
300 @ 5Kv 150 @ 20Kv 75 @ 40Kv |
Sheath Test (Optional) | YES | YES | YES | YES |
Voltage in kV | 0 – 8 | 0 – 8 | 0 – 8 | 0 – 8 |
Current in mA | 50 | 50 | 75 | 75 |
Prelocator | ||||
Maximum measuring range (KM ) | 160 | |||
Prelocation modes | TDR , ICM , SIM/MIM , Decay | |||
Resolution | 0.4m | |||
Sampling rate | 400MHz | |||
Pulse Width | 20ns – 10μs | |||
Pulse Amplitude | 65V | |||
VOP (V) m / μs | 20 – 300 | |||
Output Impedance | 5 – 100 ohms | |||
Input signal gain in dB | 0 – 100 | |||
Display | Colour Tablet – 10 inch – Touch | |||
No of records storage memory | > 1000 | |||
Communication interface | USB | |||
Control | Touch | |||
Internal battery | Li-ion – 7.4V/6000 mAh | |||
Battery operation fully charged | 8 hrs | |||
Battery charger | 110 – 220V AC – 50Hz , 8.4V/3A DC | |||
General Parameters | ||||
Input Power Supply | 230V AC ± 10% | |||
Power Frequency | 50Hz or 60Hz ± 5% | |||
Operating temperature | -10°C to +55°C | |||
Degree of Protection IP | 21 | |||
Impulse | 4kV/1000J (Optional) only applicable for COMPAC 40 and 40D & Not Applicable for Compac 20 and 20D | |||
Approximate Weight in KG | 185 | 190 | 195 | 215 |
Approximate size (LxWxH) | 600 X 550 X 1000 mm | 600 X 600 X 1000 mm | 670 X 670 X 1000 mm | 670 X 720 X 1000 mm |